Thermal Label Printer Stand - Support Free

prusaprinters

<p>Edit 22 Aug 22: Updated roller and roller pin dimensions for better fit/performance</p><p>&nbsp;</p><p>After trying some of the other label printer stands on here, I either wasn't satisfied with the design or how they printed. It was time for me to take… a stand. Make a stand. I meant make a stand.</p><p><strong>Key criteria for this design:</strong></p><ul><li>No sharp corners, particularly on the outer perimeter</li><li>Share a similar design with my label printer (Neflaca BT printer: <a href="https://a.co/d/c5VUsjs)">https://a.co/d/c5VUsjs)</a></li><li>Print quickly and easily without supports</li><li>Magnets, because who gives a flux?</li></ul><p><strong>BOM</strong></p><ul><li>1x Stand (printed)</li><li>1x Roller (printed)</li><li>2x Roller Pins (printed)</li><li>2x 608ZZ Bearings</li><li>(optional) 4x 6x3 Neodymium magnets&nbsp;</li></ul><p><strong>Filament Material</strong></p><ul><li>Any, but PLA is probably still the easiest. Get fancy if you want, doesn't bother me! :)</li></ul><p><strong>Printing/Assembly</strong></p><ol><li>Print stand design of your choice, roller, and roller pins in your choice of filament</li><li>(optional) Stack magnets together in pairs, then press into the small cavity where the label roll will rest</li><li>Insert roller pins into roller</li><li>Attach bearings to either side of roller</li><li>Insert roller through label roll&nbsp;</li><li>Insert into stand</li></ol>