Themed Versatile Floating Photo Frame

thingiverse

Themed Versatile Floating Photo Frame! Get your hands on a floating themed photo frame to stick to your wall or cork board! You're covered. Need a themed photo frame that stands on your desk? No problem! Need one to hang or stand vertically or horizontally? Easy peasy! Want a floating themed photo frame to attach to your fridge with a magnet? Child's play! Looking for a themed photo frame for different times of the year? Done deal! These versatile photo frames are my fresh spin on http://www.thingiverse.com/thing:581117. I thought it was an awesome idea, but I wanted something sturdier, so I added a frame (Included) and gave it a theme - perfect timing with Christmas just around the corner! As luck would have it, the bracket can be slid down to the bottom for use as a stand on a table or desk. I was thrilled, so why not create one for other occasions? One thing led to another, and before long, I had several made. Each of these floating photo frames holds a standard 4x6 photo in place. Included Themes: Christmas - Winter.stl New Years - NewYear.stl Valentines - Valentines.stl Graduation - Graduation.stl Summer - Summer.stl Halloween - Halloween.stl Plain - Plain.stl More to come! Also Included: Vertical Bracket - To stand vertical frames. Horizontal Bracket - To stand horizontal frames or attach to wall or cork board. Magnetic Bracket - For horizontal or vertical frames to stick to magnetic surfaces. Glue a 3mm deep by 12mm diameter neodymium magnet to the provided hole. Back Frame - To hold photo in frame. Assembly Instructions: Snap your photo into place and clip on the back frame piece to secure it. Attach either the horizontal, vertical, or magnetic bracket to keep everything together. For horizontal frames, use the magnetic or horizontal bracket and clip it towards the middle to tack to a wall or slide the bracket towards the bottom to stand on a desk. For vertical frames, use the vertical bracket and clip it towards the middle to tack to a wall or slide the bracket towards the bottom to stand on a desk. Print Settings: Printer Brand: RepRap Rafts: No Supports: No Resolution: .2 Infill: 15% and 25% Notes: I printed the frames in PLA with an infill of 15%, then added brackets with 25% infill. No supports needed.