The Youtube subscribers counter

thingiverse

Hello everybody, today I'm excited to share my latest creation with you all! To make this counter work, you'll need the following components: - Nudemcu V3: This is a vital part of the project, and it can be purchased for just €2.5. - MAX7219: You'll also need to buy this display driver, which costs approximately €3.5. - 3.7v LiPo Battery (720mah): A small battery will keep your counter running smoothly, and you can get one for around €2. - TP4056 (battery charger): This tiny charger is a must-have, and it's available for just €0.3. - ON/OFF Switch (10Pcs): You'll need this switch to power on and off the counter, and it costs about €1.5 per piece. - M3X12 screw (100Pcs): These screws will hold everything together, and you can get 100 of them for just €3. - 10mm Anti slip (100Pcs): Finally, these anti-slip pads will ensure your counter stays in place, and they cost around €1.5 per hundred. The total cost comes out to be approximately ±15€. Now that we have all the necessary parts, let's move on to the printing process! Step 1: Printing You'll need to print two files: nico1.stl and nico3.stl. Here's a picture of what it should look like:  Step 2: Assembly First, put the dot matrix on, but don't forget to solder the pins in this order ↓. You can see an example of what it should look like:  Next, attach the display and make sure everything is securely connected. If you want to avoid any potential bugs, you can glue the wire in place. Step 3: Cabling Here's a picture of what the cabling should look like:  Finally, attach the lugs to match perfectly with the switch and box. You'll need to flog them into place, but it's worth it in the end. That's it! With these simple steps, you should be able to build your very own YouTube subs counter. Good luck!