The Simpsons House 3D print model

cgtrader

The Simpson Family Home in Stunning 3D - A Faithful Model for Fans Get ready to bring the iconic Simpsons home into your world through this meticulously designed 3D model, straight from television's most beloved family. This precise replica mirrors the original design with stunning accuracy. Doors swing open with articulated freedom (front, back, and garage doors) while the roof slides off for convenient access. Important Note: Before embarking on this intricate project, ensure your 3D printer is impeccably calibrated, especially focusing on the extrusion factor to guarantee the highest quality output. Choose PLA for all parts; it's a top choice for creating crisp details. Unlike most complex designs, you won't need advanced software support during printing since necessary supports are directly incorporated into the STL model, distinguished by additional tabs for hassle-free removal. Technical Specifications: - Printing Bed Size: 20x20x10 inches. - Maximum Nozzle Diameter: 0.4mm. Step-by-Step Printing Guide ### Windows: **Step 1**: Printing the main windows. Setting up: Layer Height: 0.18 mm. Speed: 20 - 40 mm/s. **Step 2:** Rotating 45 degrees, print the bay windows. Settings: Layer height: 0.18 mm. Speed: Between 20-40 mm/s ### Doors: Set the door frame with these steps. Layer Height: 0.18 mm. Printing Speed: 20 - 40 mm / s. ### Hinges: Hinge pieces come in two for every hinge, hence, printing them as a single piece requires using settings: Settings: Double layers, with double speed. 0.18 layer height 2 times. Speed range: 20-40mm/s **Step 4:** Printing the roof Set up printing the roof by choosing the layer height to 0.2 or less (according to your preference). Also print faster at speeds between 40-60 mm/s. ### Walls: Step: Setting up to print the wall. Using settings: Layers hight, choose anything within the range 0.2 to 0.3 mm Printing Speed Range of Between 40 and 60 mm / s