The Punisher Customized iPhone 4S Case

thingiverse

Customized version of https://www.thingiverse.com/thing:58001 \nCreated with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=58001 \n\n \n \n Instructions\nUsing the following settings: \nCorner radius for five-sided shape is set to 8.0 mm.\nPrimary color selected is red.\nThe length of four-sided shape is 115.25 millimeters.\nSelected mashup type is two.\nThe width of four-sided shape is 58.55 millimeters.\nThe shape of the pattern is six-sided.\nThe width of five-sided shape is 58.6 mm.\nThe thickness of the bottom layer is set to 1.0 mm.\nThe sweep width of four-sided shape is 6.17 millimeters.\nThe type of case chosen is one.\nVersion of iPhone supported is one.\nTolerance for four-sided perimeter is 0.5 mm.\nTolerance for five-sided perimeter is also 0.5 mm.\nRadius of the pattern shape is 17 units.\nThe scale factor for the image is 100 percent.\nInclude hooks in design? No.\nThe height of four-sided shape is 9.5 millimeters.\nThe rotation angle for pattern is set to thirteen degrees.\nCorner radius for four-sided shape is again 8.0 mm.\nThe length of five-sided shape is 123.8 mm.\nThe height tolerance for four-sided shape is 0.2 millimeter.\nThe thickness of the pattern is 5 units.\nThe tapering ratio for case design is set to three.\nCase material thickness chosen is 1.8 mm.\nThe height of five-sided shape is 7.6 mm.\nThe thickness of bottom layer for four-sided shape is 0.6 mm.\nThe image rotation angle is zero degrees.\nThe overlap value for pattern design is eighteen units.\nThe sweep width for five-sided shape is set to 6.1 mm.\nThe height tolerance for five-sided shape is 0.2 mm.\nThe offset in the Y-direction is 0 units.\nOffset in the X-direction is also zero units.\nThe index for inner circle (j) is 0.\nThe index for outer circle (i) is also set to 0.