The Poop Emoji

prusaprinters

I went looking for a poop emoji to re-use but only found them as STL files which are hard to work with, so I made my own to use and also provide this in other formats for everyone.This poop emoji is based on my poop model. There are separate solid, hollow and magnetic versions supporting either 5x2mm or 6x2mm disc magnets.PrintingThe model is large and intended for you to scale down in your slicer or CAD software, the normal size is about 24cm wide. The Bambu version is already scaled down to 25%. The magnetic version is already scaled down and not re-sizable without losing support for the magnets.They are made to be printed directly on the print bed in normal orientation with no support. There is a Bambu Studio painted file available as well as a normal 3MF. I used a 0.4 nozzle with a 0.2mm layer height for everything. The colours I have used in my print above are all Extrudr NX-2 matte colours - brown, grey and black.MagnetsIf you have chosen a magnetic version for safety purposes put a small amount of glue on the magnets before insertion. The gap may or may not be tight depending on tolerances on the magnet/hole so the easiest way to do this is to put the magnet on the back of a metal spoon, dab the glue, carefully align the magnets over the holes and apply pressure. It should pop right in.Versions2023.11.02: Add magnetic poop emojis.2023.11.02: Increase pupil depth so it can be scaled smaller without slicers removing the colouring. Relocate eyes slightly to improve print quality of the left eye. Add a solid version of the model. The CAD files are also cleaner.2023.11.01: Initial version.SupportIf you like our poop please consider joining our club here on Printables!