The Notifier

thingiverse

<h1>NOTIFIER</h1> This is my entry for the #fusion360challenge. It's a desktop notification system that utilizes a [sparkfun transparent Oled](https://www.sparkfun.com/products/15079) as a retractable screen to provide users with a clean, futuristic UI. The Notifier can completely retract via two servos when the user doesn't want to be bugged or privacy is a concern (and it looks cool!). There's a single ring lit button on the front. This would allow the user to power on/off NOTIFIER with a long press, pair a Bluetooth device with a short press, and reset hardware with five rapid presses. I'm certain NOTIFIER could run on a custom PCB using an ATMEGA 2560 as a MCU and the HM-13 Bluetooth module. In the design, I've included two 400mA LiPo batteries that should provide at least a day's worth of constant use. The Notifier is equipped with a USB-C charging port. I believe the main body design showcases a 3D printer's ability to produce complex designs that would be difficult to make using other methods. I tried to minimize overhang in an effort to decrease print time and reduce support scarring. <h2>NOTES/ TO-DO:</h2> - I think the mechanism to raise and lower the screen could be problematic. Possibly the two arms need to be joined with a slot and pin? Some experimentation is needed. As I get time, I'll update the design. - Adding some RGB LED's to the interior of the body would be pretty cool (and easy). A user could put NOTIFIER in "priority mode" where the screen is retracted and only allowed notifications would light the device? - Make sure the USB port is power and data, giving the user the ability to push firmware updates to NOTIFIER. This would also allow for debugging during development. - Incorporate a [Temp/humidity sensor IC](https://www.digikey.com/product-detail/en/analog-devices-inc/ADT7411ARQZ/ADT7411ARQZ-ND/820253) and [RTC](https://www.digikey.com/product-detail/en/epson/RX8900CE-UA3/SER4053TR-ND/5119266) on the custom PCB and read out environmental data and time when no notifications are being displayed. - Add [ambient light sensor](https://www.digikey.com/product-detail/en/lite-on-inc/LTR-329ALS-01/160-2160-2-ND/4847334) to auto-magically adjust LED and display brightness. - All sensors use i2c