The no-strings part cooling fan duct for Sovol SV01 Rev.3

thingiverse

Introducing the no-frills, no-strings duct your SV01 will become an instant fan of :D. Designed with PETG in mind. A sagging-resistant design, it will not bump into your prints. Minimal path air flow that will not cool the nozzle. <u>It has a built-in support for the vent arch.</u> Just Xacto it away from the part when done printing. <ul> <li><font color=lightgrey>Rev.2 has a single larger opening that flows tangential to the nozzle tip to improve cooling of the just-extruded material. Also added a second internal support pillar to improve bridging. (9-25-21)</font></li> <li><font color=lightgrey>Rev.2 Standalone can be used without the stock heat break metal shroud in case you have modded your heatbreak cooling fan and no longer use the stock metal shroud. It will mount directly to the X-carriage using one M3 screw. (10-19-21)</font></li> <li>Rev.2.1 is simplified internally to print faster and more reliably. (10-29-21)</li> <li><font color=lightgrey>Rev.2.1 Standalone can be used without the stock heat break metal shroud in case you have modded your heatbreak cooling fan and no longer use the stock metal shroud. It will mount directly to the X-carriage using one M3 screw. (2-25-22)</font></li> <li>Rev.3 Standalone has an optimized airflow path and is perfect if you no longer use the stock metal heat break shroud as it will mount directly to the X-carriage using one short M3 screw. (5-13-22)</li> </ul> It's so simple to print even I could do it, please post makes! :)