The Mandalorian's Blaster - Custom Style

thingiverse

This is my version of the Mandalorian's blaster. I have added an area to put a customizable cylinder. There are three different types of cylinders with their own ammunitions that I have designed so far. You can print the blaster in half with the split versions, or you can print the blaster whole. If you are printing the blaster in halves, you can use the optional alignment pins ( you will need 7) to help glue the blaster together (I used Gorilla super glue). You will also need a small screw (3 mm in diameter and 12 or 14 mm in length) to allow the blaster to open and close. In order for the blaster to stay closed you will need magnets for the provided holes on the tip and butt of the blaster (4, 12x2 mm magnets that are decently strong should work). Files you will need for the split version of the blaster: Mandalorian Blaster Tip-Split-Parts 1 And 2 Pin For Blaster Halfs (optional) Mandalorian Blaster Butt-Split-Parts 1 And 2 Mandalorian Blaster Grips-1 And 2 Files you will need for the non-split version of the blaster: Mandalorian Blaster Butt Mandalorian Blaster Tip Mandalorian Blaster Grips-1 And 2 Update 1: I have added a holster for the blaster that you can clip on your belt or pants. Update 2: I have removed Cylinder 3 because of its fitting problem with the blaster. Update 3: I have fixed Cylinder 3's fitting problem and have also upgraded all of the cylinders appearances.