The Locking Logs puzzle

prusaprinters

<p>This puzzle has two identical pieces that lock into each other in a cross pattern and the challenge is to separate between them.</p> <p>You will need four metal pins with 4mm diameter and 35mm length such as the ones here <a href="https://www.aliexpress.com/item/32868697789.html">https://www.aliexpress.com/item/32868697789.html</a></p> <p>Set your slicer to pause just at the top of the horizontal cavities so you can place the two pins before you continue printing.</p> <p>Printing is straight forward, e.g. PLA, 0.2mm layer, 3 shell layers, and 15% infill. No material support.</p> <p>After printing I clean the through holes by drilling them with a 3/16 drill bit. This makes sure that the pins go smoothly throughout the holes.</p> <p>The Fusion 360 design file is included.</p> Category: Puzzles