The Little Prince Boa Fridge Magnet

cults3d

The Little Prince Magnet in Two Pieces (Base and Top). A Boa Constrictor Digesting an Elephant with Cross-Section. Main Version is for Two Colors - Base and Outline. There's also a Version with Three Colors, Where the Third Color is Mainly for the Elephant, as Seen on the Photo. Single Extruder Printing Works Well at 0.4mm (or 0.1-0.2mm). The 0.2mm Layer Shows Great Results. When Printing a Fridge Magnet, First Glue the Base and Then Check if Your Second Magnet Will Stick to It from the Other Side. If So, You Can Glue the Top Model to It: Place the Magnet Inside the Elephant on the Base Model (Glue Outside), Then Carefully Attach the Top Model, Trying to Line Up Both Models. I Placed Magnets Inside the Elephant's Thorax, Leg, and Earlobe. To Use a Stronger Magnet for the Top Part, Lower the Base Model in Your Slicer (Up to -0.6mm on Z-Axis) or Use Just the Base Model if You Want, or Both as Separate Magnets. Video Showing Fridge with Magnets: https://youtu.be/WFZWVZwfmBk Edit 05/2019 Added Image of How to Use Magnetic Tape Properly.