The Legend of Zelda - Hylian Shield multi-parts

cults3d

Good morning, everyone, First of all, thanks to fasteddy516 for its work and for making available the source file fusion 360 (https://www.thingiverse.com/thing:2677486) . Not having a multi-colour printer, I wanted to modify the project to be able to print the parts one by one with different colours. I have made the following changes: Cut out the elements so that they can fit together (I put a set of 0.4mm) Modification of all elements so that they can be printed flat Cutting the main shield so there is less bottom to print I printed the model at 220% for my nephew's birthday, which gives a size of 272mm x 220mm. Only the center plate requires supports. Remarks: Remember to align the elements when importing into the slicer (by default they are not aligned, but they are all printable flat) The triforce elements each have their own specific position, avoid mixing them after printing them Have a good print! / Hi all, First of all thanks to fasteddy516 for his work and having made available the fusion 360 source project (https://www.thingiverse.com/thing:2677486). I use a Alfawise U20, so I wanted to modify the project to print the pieces one by one with different colors. I made the following changes on the fusion 360 project : Cutting the elements so that they can fit together (I put a set of 0.4mm) Modification of all elements so that they are printable flat Cutting the main shield so that there is less background to print I printed the model at 220% for my nephew's birthday, which gives a size of 272mm x 220mm. Only the center piece (Center plate) requires support. Remember to align the elements when importing into the slicer (by default they are not aligned, but they are all printable flat) Enjoy!