"The HUM Box V2.0" 3D Printer
thingiverse
The Cyclops 2 in 1 out HUM Box V2.0 Build Volume: 200 x 200 x 240 mm You can likely squeeze out a bit more from this build volume, as the glass dimensions are 220 x 220 mm. Print Quality: * 6.25 micron over X and Y with 20t pulleys * 5.0 micron over X and Y with 16t pulleys For low layer heights on the Z axis, set the layer height to 0.04 or 0.08 for accurate measurements. It's time to start building! Parts will be released in batches, including drawings that explain how to build the printer. Multipage PDF files are only available via Thing Files download. Note: In the drawings, 20x20x1mm Aluminium extrusions are used. You can also use 20x20x1.5mm for added body and thread support. Pictures or videos of the progress will be posted later. Some people have asked if this is a digital design only. I've added photos of the parts to prove it's not just a digital concept. Keep in mind that parts may change during the build process, and minor updates will be noted. Check the update section frequently for changes! Posted: * Frame assembly (02-0000) * Heat bed assembly (01-0000) * Spool holder * Z-Axis assembly (03-0000) * Electrical Cabinet assembly (05-0000) * X-Y-axis assembly (04-0000) * X-Y Carriage Front assembly (06-0000) * X-Y Carriage Rear assembly (07-0000) * Extruder assembly (08-0000) * Electronics layout (09-0000) * Matching Spoolholder (10-0001) * Dual Extruder parts and cable guides * Drag/Cable Chain: 15-0600 Start, 15-0601 Link, 15-0602 End, 15-0603 Start All printable parts are now available. If you have questions or suggestions, feel free to leave a comment or send an email. I'll respond as soon as possible.
With this file you will be able to print "The HUM Box V2.0" 3D Printer with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on "The HUM Box V2.0" 3D Printer.