The Child aka "Baby Yoda" (The Mandalorian) Multi-Colour Remix

thingiverse

After weeks of insisting that my printer wouldn't be turned into a tool for supporting my wife's "Baby Yoda" obsession, I've finally given in. This is a remix of *jamesjenuwine's* *Baby Yoda* model, broken down into separate pieces for multi-colour printing. Be aware that this remix wasn't designed to be printed in pieces on a single-extruder machine and assembled afterwards - use jamesjenuwine's original model to get everything at once in a single colour. The print shown in the cover photo was done on a quad extruder Prusa i3 MK2 MMU in two steps: _Step 1_: by_ears.stl *Neat Filaments Silk Pink PLA (extruder 1)*, by_eyes.stl *MG Chemicals Black PLA (extruder 2)*, and by_head.stl *Neat Filaments Light Green PLA (extruder 3)*. _Step 2_: by_cloak.stl *Neat Filaments Bronze PLA (extruder 1)*, by_neck_cuffs.stl *Prusa Ivory PLA (extruder 2)*, and by_hands.stl *Neat Filaments Light Green PLA (extruder 3)*. Printing the head and body separately cuts down on support material required for those massive ears, allowing me to use five colours for the final print. If you have a printer that supports more than four colours, or just drop a colour somewhere, you could print it all in one go. I printed it scaled down to 25% (the original model is huge!), which measures roughly 68mm x 37mm x 58mm. Happy printing!