The Cage - Raspberry Pi 2/3 Cage for OctoPrint/OctoPi

thingiverse

EDIT: Updated with lower tolerances for easier fit as well as opening for RTC module This Raspberry Pi 2/3 case/cage allows for maximum airflow while keeping all the 3D Printer wires and cables away from the PI. No supports are needed if your printer is good at bridging when printed as oriented in the .stl file. Simply stand it up on its feet and use double-sticky tape to secure it to the inside of my printer, but be aware that your application may vary. A larger opening makes it easy to access Camera and Display connectors as well as GPIO pins. Enjoy! P.S. I also highly recommend a Real-Time Clock plugged into the GPIO, which is that yellow/orange blob in the photo. Print Settings Printer: JG Aurora A3 Prusa I3 Rafts: No Raft is necessary if you have excellent adhesion to your print bed (PrintBite, PEI, etc.) Supports: No Supports are needed if your printer/slicer is good at bridging. Resolution: .2mm Infill: 100% infill because everything is really thin and it won't matter much anyway.