The biplane fingergrip mouse (full g305 reshell)

thingiverse

What is it? - A small, lightweight modular printable reshell for the logitech g305 mouse, designed to be easily extendable by different side panel extensions and button designs. Two types of buttons are provided, smaller symmetric bunny ears (button small) and wider asymmetric biplane ones. Weight is 48 grams with near perfect center of gravity due to aaa-battery positioned in the middle. Charging port is provided up top for batteries with a charging port on the side. Printing tips - Layer heights of up to 0.2mm have been tested to work. Supports are not required if you print the top part upside down. Buttons can do with some negative x/y expansion (~-0.05) or the fit of the stems will be tight and may require a bit of filing to fit. Bottom is designed for teflon tape, which is very thin (~0.13mm), if you want to use thicker feet shave any excess over 0.13mm from its thickness if you wish to keep same distance from the mousemat as with the stock setup. PCB - The top part of a g305 pcb must be trimmed down and the antenna reattached with a wire for the pcb to fit.