The Biggie Dugout for Dynavap XL

thingiverse

I've finally made the XL version available, ready for printing at last! This design is optimized to hold the Stinger Quad Torch Lighter by Vertigo, which can be found on Dynavap's website: https://www.dynavap.com/dynashop/accessories/quad-torch-lighter. The lighter's dimensions are listed as 8.2cm x 3.5cm x 1.9cm according to the site. To fit the lighter, I measured with calipers and created a hole of this size: 40mm x 20mm x 88mm (X,Y,Z) ***Note: If you want your Dynavap to center in the magnet like the OG Dynastash, be sure to purchase a DIAMETRICALLY aligned magnet for the middle. If not, you might end up with an AXIALLY aligned magnet by mistake, and the Dynavap won't stick in the middle of your disc magnet. I've learned this the hard way! ***You can also order the magnet provided by Dynavap on their website, but as I designed this case with a thicker magnet disc, it will look pushed in. I might design another case that looks almost flush and works with the standard Dynavap magnet. The magnets you'll need are: 2x Neodymium Magnets 6mm x 1.5mm (1/4 x 1/16) https://www.ebay.com/itm/50-Strong-Rare-Earth-Neodymium-Disc-Magnets-1-4-x-1-16-inch-New/261420345696?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 1x Diametric Neodymium Magnet 13mm x 3mm (1/2 x 1/8) https://www.ebay.com/itm/20-Neodymium-Magnets-1-2-x-1-8-inch-Disc-DIAMETRIC-N48/400076765754?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649