TEVO Tornado SKR 1.1/1.3 Adapter

cults3d

Bigtreetech SKR 1.1 or 1.3 adapter for the Tevo Tornado printer. This is intended for the original version that used the MKS Base 1.4 board. Later versions use the MKS Gen L and may be more dificult to adapt. This is a remix of this adapter for the MKS Gen L: https://www.thingiverse.com/thing:2784570 The difference is that the board mount screws, are moved 3.5 mm away from the edge to provide enough clearance for the Micro SD card. It is important to clean and tidy up the 6mm mount holes with a drill like the one shown in the picture. To mount the adapter in the Tevo Tornado enclosure, use three of the original M3 screws used for the MKS Base board with a M3 washer. Don't put the one the scree in the hole under the board. Make sure the adapter sits flat against the box, otherwise the USB port will not align properly with the hole. To mount the SKR board you'll need 4x M2.5x8 screws, and 4x M2.5 nuts. FreeCAD file is included if someone wants to further customize this piece, like adding a small fan from the side, which I did not do.