Tevo Tornado MULTI Camera Mount Z axis for Pi Cam Logitech c270 c310 c920 9000

thingiverse

This is a Camera mount that goes on the X-axis Stepper cover, offering several advantages. Notably, it allows for movement up and down with the Z-axis, keeping the printhead and top layer in sight at all times. This setup also avoids vibrations caused by jerky printbed motions. Currently, there are four base options available: A - Super Extra Distance (EZABL or other sensor support) This option features screws that can be installed on printers' x-axis covers using default screws. B - Standard C - Extra Distance (EZABL or other sensor support) D - Extra Distance with screw support (EZABL or other sensor support) These bases can accommodate various camera models. Cameras Currently Supported: Universal Mount This mount is compatible with all cameras and should be used only with base option A. It can be installed horizontally, vertically, upside-down, centered, rearward, forward, or in any other configuration. The camera can be secured using screws, velcro, double-sided tape, or cable ties through the slits above the screw holes. Logitech C270 Direct This camera model does not require extension A or B or C or D. It can use a pin from the default camera mount or a 3x22 screw with a nut for installation. Manual Focus (https://www.youtube.com/watch?v=fJYqHhkq42M) Logitech C310 Direct Similar to the Logitech C270, this model does not require extension A or B or C or D. It can use a pin from the default camera mount or a 3x22 screw with a nut for installation. Manual Focus (same as C270 above) Logitech 9000 Thanks to Norbert Zalog for testing this model. Logitech C920 This camera requires extension and Mount A, and there is an installation video available online. PICam This camera comes in two pieces: front and back. There's also an alternate model designed by DAN TexasMan on Thingiverse. PICam HDMI Extension Mount Waveshare PI Cam with IR or similar This camera has a separate front and back piece, but there is an alternate design available on Thingiverse. PS3 Eye CAM This camera requires two pieces: bottom and top. It needs to be tested by users; please comment if it works for you. Microsoft VX-xxxx Credit goes to zoombee for creating this model's design. Microsoft Lifecam Studio This camera also requires testing; please comment if it works for you. Microsoft Lifecam 3000 and similar Action Camera Needs Testing: If you try, please comment if it worked for you. GoPro If your camera is not listed here, we'd love to see it! Please Comment Here's a timelapse using this mount: https://www.youtube.com/watch?v=1xcqQ8varPI We're open to suggestions and input - please Comment! Visit my site www.fission3d.com for 3D Guides and other STL files. If you like our work, consider supporting us by Donating.