Tevo Tornado/CR10 Bed chain

prusaprinters

<p>Cable chain for the heatbed of the Tevo Tornado, it might also work with the CR-10 but I did not test that.</p><p>I switched from my anet a8 to the tevo tornado and I missed the cable-chain for the bed. Especially because there is no strain-relief for this printer.</p><p>I used the frame-piece of "stevenfayers" and slightly modified it so you can equate the z-height of the bed and the mounting point.<br>I used the trusty old chain of "sukhoi27" and modified it slightly to fit the cables. Now you can just put in the cables and close the chain link off with a pin.<br>For the strain-relief and bed mount I used the design of "Pemic' and just pasted a chain link on it</p><p>Hardware:</p><ul><li>3 zip ties for the strain-relief,</li><li>2x t-bolt nuts + 2 M4 bolts to connect to frame.</li><li>2x m3 bolts and nuts for the last chain</li></ul><p>Print:<br>5x "chainlinks open 4x" (you need 18 chain links)<br>18x "cable holder pin"<br>18x "cable holder cap"<br>1x "edited frame mount"<br>1x "mount last chain"<br>1x "bed mount with strain-relief" or "Carriage mount with strain relief"</p><p>Visit our site if you want to modify/design something or to order 3D printer parts online;<br><a href="https://voxel3d.nl/">https://voxel3d.nl/</a><br>(currently only possible in europe)</p><p>Watch it here:<br><a href="https://youtu.be/d3aexUMfAys">https://youtu.be/d3aexUMfAys</a></p>