Tevo Tarantula PSU Cover

cults3d

Cover for TT's PSU. Links to the components above. Design inspired by the many other variations on Thingiverse, but made from scratch. You will need: - 3x XT60 connectors (https://www.banggood.com/5X-XT60-Male-Female-Bullet-Connectors-Plugs-For-RC-Battery-p-916559.html?rmmds=myorder) - 1x three pin IEC320 C14 Module Plug with switch (https://www.banggood.com/1pcs-10A-250V-3Pin-IEC320-C14-Inlet-Module-Plug-Fuse-With-Switch-Male-Power-Socket-p-1120059.html?rmmds=myorder) - 1x Snap-in mini switch for lights or whatever you want to use it for (https://www.banggood.com/5Pcs-Black-Push-Button-Mini-Switch-6A-10A-110V-250V-KCD1-101-2Pin-Snap-in-OnOff-Rocker-Switch-p-1096122.html?rmmds=search) -2x M3 bolts (3-4mm long), 2x M3 nuts and 1 10-15mm long M3 bolt to hold the cover in place. INSTRUCTIONS: 1) The 3 pin plug needs two M3 screws of at least 3-4 mm long and 2 nuts. I used some from this box: https://www.banggood.com/240pcs-M3-DIN912-Hex-Socket-Head-Cap-Screw-Nut-Assorted-Kits-4-25mm-p-1074609.html?rmmds=myorder 2) The slot for the TX60 connectors is tight enough to hold them in place but just in case I superglued them to the walls. 3) The mini switch snaps in place. 4) to hold the cover in place screw the 10-15mm M3 screw through the hole on the right wall onto the hole on the PSU. I hope I made it clear. I'll try to answer questions. I'll leave an .STP file so you can modify if you wish to.