Tevo Tarantula Pro E3D V6 Hotend & 12mm Inductive Probe Mount
prusaprinters
<p>I got a free Tarantula Pro with a creality hotend which wasn't mounted and the Creality fan shroud. I decided to adapt it to an E3D V6 for printing Nylon and CF-Nylon so I designed up this part. Mounts with two M3x18mm (or 20mm) flathead screws, and clamps with either 6-32x1/2 or 6-19 thread rolling screws which I had on hand. SHCS or button head for the clamp.</p> <p>Note: MY probe is as low as it goes and its a 4mm distance probe, so if you want to use this with a 2mm probe you may wish to modify the design and lower hat mount. >4mm distance triggering probes should be fine.</p> <h3>Print instructions</h3><p>Print with ABS, PC, or Nylon unless you will only ever print with PLA. I tried it in PLA and it softened with the nozzle at 250C. Should print with no supports with both halves of the hotend semicircle oriented upwards. 0.2mm or lower LH.</p>
With this file you will be able to print Tevo Tarantula Pro E3D V6 Hotend & 12mm Inductive Probe Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Tevo Tarantula Pro E3D V6 Hotend & 12mm Inductive Probe Mount.