TEVO Black Widow Fanduct + BLT Mount + Two 40x20 Fan + Hot air pipe

thingiverse

Fan Duct + Two Cooling Fan + BLTouch Mount + Hot Air Pipe for TEVO Black Widow When designing, I aimed to integrate the maximum of beneficial enhancements into one model that occupies a minimal space and has a small weight. It features: Enclosed central duct allowing use of standard fan to prevent cooling heater. Pipe for two 20mm cooling fans (10mm fans can also be used). Mount the BLT sensor located more closely to the nozzle. Removable air pipe to retract hot air from working area. Screws to mount: 2pc M4x15mm (for central mount) 2pc M4x15mm (for Left and Right duct) 4pc M3x25mm (for center fan, use standard TEVO screw) 2pc M2x10mm + M2 nuts (for BLT sensor or use standard screw) 8pc M3x20mm (for two cooling fans)*** If you have 40x10mm fan use M3x10mm screw) BLTouch offsets: X= 26mm Y= -19mm Z= -1.5 (May be a little bit different (-1.4 or -1.6), need to do a calibration Z axis) Print Settings: Printer: TEVO Black Widow Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% + Notes: For optimal printing results, you can use the placement of parts as indicated on my photo. Setting up Support: Support Resolution: 1.0mm Support Infill: 20% Upper and Lower Separation: 0mm Print settings: Material: ABS Hotend: 250C Bed: 105C Print Speed: 35mm/s Printing time 6 hours