Test cable organizer

youmagine

This organizer holds your test leads and clips used with multimeters, power supplies, and other measuring devices (4mm banana plug). The top row holds 12 test probes or fine tweezers - 4.5mm diameter. The second row holds six alligator clips - 13x9 mm. The third row has three bars for cables. Size: 150x67x42 mm (print with original scale!). This organizer is designed specifically for "Hirschmann" equipment (see picture). If you use different brands, check that your stuff will fit before printing this large item! Sketchup 8 source files are included so you can adapt for your own gear. Message me if you need me to make adjustments for other brands. Mounting: This organizer can be mounted on the wall with two M4 screws (sliding receptacles on the bottom). You can also use double-sided tape. Printing instructions (Cura 13.10): Use a layer height of 0.06 mm (0.1 works perfectly, 0.06 gives better optical quality). The shell thickness should be 0.8mm (1.2 for even more strength, but takes long to print). The top and bottom layers should be 1mm thick. The infill percentage is 24%. Use none as the support type (no overhangs or bridging). Choose none as the platform adhesion type. Tip: Use a material that produces minimal stringing and has good layer adhesion. I printed it with "Raven Super Premium PLA by ProtoParadigm".