Tesla Model 3(d print)
pinshape
Roughly based on Daniel Noree's incredible OpenRC F1 platform, this 1:18 scale Tesla Model 3 RC car is a masterpiece. Some parts are still under development (the right rear axel holder/motor mount may need fine-tuning, the battery clip could be adjusted for individual battery packs, clips to snap the body together might require scaling, etc). Print at your own risk. The same bearing set can be used from the OpenRC F1 car (found here http://www.fasteddybearings.com), as well as the same M3 screws (no need for nuts). My electronics were taken from another 1:18 scale car I had on hand. However, it should fit any standard 1:18 brushless motor/ESC, micro servo, RX and 2S LiPo. Parts are generally printed in PLA at .2mm layer height, varying infill, and plenty of support material. Tires can be printed from TPU. Have fun!
With this file you will be able to print Tesla Model 3(d print) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Tesla Model 3(d print).