Tesla Model 3 (2020+) Frunk Grocery Hooks v2

prusaprinters

<p>Add grocery hooks to your Model 3 frunk!</p><p>Requires a <strong>Tesla Model 3 built on or after August 2020</strong>. Supported frunks will have two holes on the inside of the frunk weather stripping, each containing a single bolt.</p><p>See pictures for correct installation and frunk type.</p><h5>Printing</h5><p>One side of the print has a flat edge - print this side facing down. (Print sideways, not standing up.) <strong>Does not require supports.</strong></p><p>Print using PETG for a longer-lasting, more study hook. Recommend 0.2mm layer height or smaller with at least 3 walls. PLA may not last for an extended period of time in extreme hot or cold weather.</p><h5>Installation</h5><p>Remove the two bolts from the frunk (don't worry, the frunk plastic tub will remain in place) and insert the printed grocery hook. Ensure the hook is facing away from the frunk basin (see pictures). Reinsert the bolt through the hole and tighten (you may need a slim / extendable or angled wrench to tighten the bolt. Tighten so the bolt is snug, but do not overtighten as the 3D printed plastic could crack.</p><h5>Usage</h5><p>Attach your grocery bags and let them rest in the frunk. The hook will not touch the frunk hood when closed.</p>