Tesla K80 Fan adapter for 80 x 80mm Fans

thingiverse

The Nvidia Tesla K80 is a graphics processor for server desks, so it has no active cooling. With this cooling channel you can convert the K80 to active cooling. The duct is attached to the three screws that are provided for the original cooling air duct of the K80 (M3). You can use any 80mm x 80mm fan. I use two Papst case fans that are connected in series. Only one can be seen in the pictures !! The transition from the canal to the Tesla K80 is tight and super soft. The channel has a cutout at the top for the power connection. Because of the severely limited accessibility of the connector's locking mechanism, I use an extension cable to be able to remove the card later without any problems. In order to be able to install this channel, however, you need a little space behind your graphics card. The duct is 100mm long without a fan. The cooling duct is made in one piece, so a support structure is required. The model is 100% penetration-free and very finely meshed. The channel can be printed immediately without further processing.