Tesla Charger Lock

prusaprinters

<p>This is a charger lock for a Tesla. I made this for a buddy of mine so I am not sure which Tesla models it will fit but I believe he has a model 3. This is just a beefed up version of some others I have found on here. The ones I had found were just a bit too flimsy so I wanted to make it stronger and more durable.</p> <p>I have included 2 variations, one with a lock logo and one without. I was going to add one with a Tesla logo but wasn't sure if this would be copyright infringement.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div> <p><strong>Rafts:</strong></p> <p>Doesn't Matter</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Doesn't Matter</p></div> <p><strong>Resolution:</strong></p> <p>.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>100</p></div> <p><strong>Filament:</strong> <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=GST3D++PLA%2B">GST3D PLA+</a> <br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>I recommend printing this with 100% infill for the strongest print and to reduce possible warping from direct sunlight exposure. I used PLA + but I am sure any filament would work fine. I played around with the fit but if it is too snug or too loose I recommend scaling it up or down to your exact fit. I also recommend printing a low quality test print to test fit on your charger. </p></div> </p></p></p> Category: Automotive