Terrarium: spring jar of the goddess Isis

thingiverse

This terrarium features water gushing from a jar held by the goddess Isis.How to assemble:For details, please refer to the photos I posted and the stl files named [_isis_assembly.stl] and [_isis-transverse-sec.stl].The general assembly instructions are below.1) Glue the rock and standsThe stand, consisting of 4 pcs, are to be joined to the bottom of the rock with methylene dichloride adhesive to lift the rock out of the water to make room for the pump.2) Insert nets onto the slit of standsEach stand has two slits 2 mm wide, into which the nets are to be inserted. This is to prevent sand and other debris from entering the pump directly. It is recommended that pumice or other porous stones be added to this "pump room" for filtration. Soil and plants such as moss should be planted outside the net.Although 3D data is available for the net, it is easier to cut a plastic net to 40x48mm instead of printing it.3) Tubing through rockA hole goes through the statue of Isis and the rock. A tube connected to a submersible pump is inserted into the statue from the bottom of the rock.4) Use of water volume control pipe (in case of high water volume)The pipe is used to control the strength of the water flow from the pump. The pump I have has a drainage capacity of 180L/H, which is too strong and causes water to spray out of the pot like a fountain. So, the use of the pipe is not mandatory, but depending on the performance of the pump you have.5) Place the statue on the rockThis statue is freestanding and does not need to be glued to the rock. It is better not to glue them, considering maintenance and cleaning.