Terrarium project by Mayku

cults3d

Prepare the templates for the terrarium base and cover by utilizing 3D prints, though wood or clay can also be used. Extract a Mayku Cast Sheet from the pack and remove the protective film covering the top surface, which can be disposed of through household recycling. Next, place the sheet inside the FormBox and initiate heating of the plastic material. Position the upper template in the center of the vacuum plate and observe as the plastic begins to ripple at the edges and sag in the middle. Then, form the template with the Mayku Cast Sheet by allowing it to conform to its shape. Once the mold has cooled, carefully remove the template from its surface. Using a pair of scissors, delicately cut away any excess material remaining on the template. To create a mold for the lower template, repeat this process using the same materials and techniques. To prepare the concrete mixture, combine water with concrete powder in a well-ventilated area. Pour the resulting mixture into the mold, stopping just short of the brim. Gently shake the mold to remove any air bubbles that may form, which will rise to the surface as a result. Allow the mixture to set and harden overnight. After 48 hours have passed, carefully remove the concrete from its mold by applying gentle pressure to the top surface. To achieve a smooth finish on the base, place a sheet of coarse sandpaper on a flat surface and rub the base against it in a gentle, circular motion. Finally, use sculpting clay, models, and textured materials to create your mini-world within the terrarium. Once complete, carefully place the lid you created earlier atop the terrarium, which can be used for decoration or as a thoughtful gift for others.