Terrarium Mist System Conduit

thingiverse

A conduit set for terrarium mist system, designed to be used with 8mm tubing and brass spray nozzles. Print one nozzle assembly and one sprayer arm base plus however many conduit pieces you need for your tank per nozzle run. For my large tall exo terra I needed 3x 100mm and 1x 40mm pieces. The conduit is designed to be stuck into a corner with silicone, can be used horizontal or vertical and can also be used to cover lines for air stones. These are designed to fit together without needing any glue, and the nozzle assembly is supposed to swivel in the base for some adjustment. With the correct nozzles, they should slot into the nozzle assembly part without needing any glue. The idea with this design was to cover up any ugly tubing, something that many commercial mist systems don't do, and this could possibly be used with a commercial system using 8mm or smaller tubing. Supports are only needed for the nozzle assembly part, the rest can be printed on end for the best result.