Terrarium 18x18x28 cm

cults3d

Terrarium 18x18x28 cm for mantises, phasms or insects and other small Animals. Made of PLA and 2.5mm plexiglass. The doors are closed by 4 magnets of 8mm diameter and 5mm thickness. For the top grid a piece of mosquito net will be used preferably in aluminium. Then 4 small screws for the grid blocks and 2 other small screws to fix the walls. To start printing all the parts. The base, The top, The divider, The bottom and top of the door, The grid frame L The 4 pieces to block the grid frame. Then using a cutter notch the plexiglass to the right size and break it at the edge of a table. Attention to the quality of the plexiglass take crystal acrylic so that it breaks perfectly straight. After cleaning the pieces, assemble them with the plexiglass. Then cut a square of screen of 158 x 158mm. Then glue it in the frame. And finally insert the magnets to close the doors. A small piece of mosquito net will be inserted into the slot that is under the divider so that the vents will not let small insects through. Cutting the plexiglass : For the bottom of the base: 168mm x 168mm For the sides: 177mm x 260mm For the bottom: 174mm x 260 For the bottom of the divider: 174mm x 70mm