Terraforming Mars board game - Storage Solution

thingiverse

Storage Solution for Terraforming Mars Board Game. **UPDATE: 25 Jun 2018:** Fix Height of Both TM_Box_Inner_One and Two. **UPDATE: 7 Sep 2017:** Sleeved Card Support I personally don't use card sleeves, but I understand that many of you will need them. The storage solution is now sleeved card support. You need to print the file TM_Card_Sleeve.stl instead of TM_Card. No need to print TM_Card_Fill.stl and TM_Inner_One.stl. You might need to print file TM_Inner_Wall.stl to put inside the big box. Keep some cards, like corporate cards, in the big box. The rest goes to TM_Card_Sleeve. You need to print 1 copy of every STL file except the S-box, which you need to print for 3-5 copies as needed. Details of insert settings are below. The S-Box is for storing player cubes separately. Actually, it needs 5 copies of the box and lid, but they will fill up the game box perfectly. However, in case you also need card holders, you may print only 3 sets of S-boxes and lids, and use Inner_One and Two to store the remaining two player cube sets. Twelve of my card holders are perfectly replacing those couple S-boxes as shown in my picture (Download it here: https://www.thingiverse.com/thing:2446046). For people who store their game box vertically, you will need some foam core or thick cardboard to fill up the box so that the box lid won't accidentally open. Alternatively, you could use a cylinder magnet with a 3mm diameter x 3.75mm height to make them stick together. The B-Ramp is not required but if you play solo a lot, you can print it and insert it in the inner slot inside the Big Box. You can use the small slot in the big box to store your player cubes. The B-Ramp will help you pick up those cubes more easily.