Terence Hill bust - No Support Cut
thingiverse
The model is split into segments to print without support. It has been increased in height to a total of 130mm. The shoulder pieces have been cut back slightly to achieve a better print angle of 55 degrees. To simplify the gluing process, FilaPins are added to each cut. For this modification, you will need six pieces of 1.75mm filament that are 13mm long. Therefore, I do not recommend scaling the model. Holes have been drilled into the base for an additional display stand and FilaPins. If you would like to create your own stand, use the FilaPin.stl file to add the necessary holes to your model. The design for this project can be found at https://www.thingiverse.com/thing:3345152. Special thanks go to IronButterFly for the impressive sculpture of Terence Hill, which is available at https://www.thingiverse.com/thing:3046689.
With this file you will be able to print Terence Hill bust - No Support Cut with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Terence Hill bust - No Support Cut.