TempTestV3 Temperature Tower Extreme - Hardcore Version

thingiverse

Since the usual temperature towers seemed too easy for my printer, I decided to create a more challenging version. However, even [https://www.thingiverse.com/thing:3366082] was still relatively simple, so I stretched the bridging distance to 100mm, one with 5mm thickness and another with 1mm. Next, I added two bows on one side, an outer radius of 68mm, one with 5mm and the other with 1mm, from 40 to 90 degrees, with notches marking every 10 degrees so you can see when it fails. After that, I included a small "cliff" on the other side, a 30-degree angle that should be manageable for any printer, on this small plateau I built two structures: a cone with a 5mm diameter and 15mm height to test basic precision and how clean the incline is; next to it is a helix with a 3mm diameter, 2mm radius, and 15mm height, also quite complicated. They are directly next to each other so stringing should be visible too. I added two overhangs, again with 1mm and 5mm thickness and 50mm distance from the cliff, making them particularly difficult. This test consists of 10 levels and is 305mm tall, so you may need to downscale or cut it for regular printers. Hopefully, this will bring clear results.