Temperature tower with settings guide

Temperature tower with settings guide

thingiverse

Modified version of the "Fast Informative Temperature Tower"(found in the link below) -------------------------------- The guide below is meant for testing PLA in a range from 220C-190C in 5C incraments. -------------------------------- Warning: Printing at a temperature lower than specified for your filament can clog your nozzle and damage your printer. -------------------------------- Guide: 1)Drop the .stl into PrusaSlicer 2)Copy the print settings from "Prusa print setting.png" 3)Slice 4)Preview (bottom left corner or press CTRL+6) 5)Edit the following lines in the layerview: Layer 35 - 220C Layer 75 - 215C Layer 115 - 210C Layer 155 - 205C Layer 195 - 200C Layer 235 - 195C Layer 275 - 190C *The command for changing temperature is M104 S[temp] (without the brackets). See "prusa modify g-code window.png" for example. 6) Export G-code -------------------------------- !!WARNING!! I've also added a ready to print NC-file, but I'd strongly advise not using that one unless you really know what you're doing. It might not compatable with your printer. !!WARNING!! -------------------------------- This is a remix from https://www.thingiverse.com/thing:3127899

Download Model from thingiverse

With this file you will be able to print Temperature tower with settings guide with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Temperature tower with settings guide.