Temp calibration

thingiverse

Custom (and yet another) temperature control/calibration test. Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: Doesn't Matter Supports: No Resolution: .25 Notes: It was intended to be printed at 0.2 resolution (every 50 layers you change the temperature) But it can also be printed at 0.25 (like in this case) but every 40 layers you change the temp. It could also be printed at 0.1 or less, but that's not really necessary... No need for top or bottom support, and one wall is sufficient. How I Designed This Why this one? why make another one? I didn't want to print a square because it would have too many unnecessary walls. A circle could be a good idea, but I wouldn't be able to see how temperature affects sharp edges. So I decided on this "oval" shape. It has some distinct lines so you get a very specific mark and you don't need to mark them afterwards. Its shape also allows it to be printed at really fast speeds. (ignore the random dots in mine, that was because I was testing random retraction points too) Preparation Set printer at 0.20 or 0.25 layer height. At temperature control: (if set at 0.25) Change the temperature every 40 layers. So: 1-41-81-121-161 (if set at 0.20) Change the temperature every 50 layers. So: 1-51-101-151-201