Teams Presence Light with ESP32 DevKitC v4, LED ring and optional PIR

thingiverse

This is a remix suitable for ESP32 DevKitC v4 and a 12 LED RGB Ring. You can put an optional PIR sensor HC-SR501 on top. I used the following things in addition for this remix: ESP32 DevKitC v4 holder: https://www.thingiverse.com/thing:4712082 Teams Logo: https://www.thingiverse.com/thing:4590686 PIR Holder: https://www.thingiverse.com/thing:291270 The original project with all instructions and material can be found here: https://toblum.github.io/ESPTeamsPresence/ I have a fork including the PIR logic here: https://github.com/pduck27/ESPTeamsPresence The following hardware fits to the base and the PIR holder: ESP32 DevKitC v4: https://www.az-delivery.de/products/esp-32-dev-kit-c-v4 RGB LED Ring WS2812 12 LEDs 37mm: https://www.az-delivery.de/products/rgb-led-ring-ws2812-mit-12-rgb-leds-5v-fuer-arduino HC-SR501 https://www.az-delivery.de/products/bewegungsmelde-modul To remix or change something you can access all files on Tinkercad: https://www.tinkercad.com/things/7HenaJ4JxSl Hints: Printing the solid case including PIR holder costs a lot of support. Printing it seperately is possible without support but I am not satisfied with the glue solution right now. Maybe the PIR should set directly in the top layer (be aware of 120° view angle) or some marks should be added to glue more solid. The PIR has to be pressed into the housing with gentle force. Bend the pins a little beforehand. The base has two small glitches I recognized after the print. But they do not matter because the cube covers them. In the back there is a small bulge and at the front are two none solid parts. So don't wonder at your print.