tea pot warmer

thingiverse

Tea Pot Warmer with Cork for Heat Absorption Since different tea light shapes are available, I chose a square one to work with. To keep the tea light securely in place, you can attach a thin cork plate on top of the first layer. This plate should have a circular hole for the light and be glued together with the first layer. ## Parts You Need - 4 M3 nuts - 4 M3 cylinder head screws (10mm to 18mm long) - Cork (5mm thick plate) ## Steps 1. Print all parts. 2. Drill holes in the stands of the bottom part. 3. Prepare the cork: 1. A 60mm x 60mm square cork plate for the bottom 2. A ring with an outer diameter of 151mm and an inner diameter of 100mm 3. Use sanding paper to smooth out the cut edges 4. Place nuts in the square holes of the lower part. 5. Attach the top part to the bottom part using screws, making sure the screw heads are below the model's surface. 6. Place the cork in the center square and the ring on top (apply a small amount of glue if necessary).