TD-1 Case for Self-Source and "PCB Kit" by AJAX-3D (Individual STLs)

prusaprinters

EDIT 7/19/2024: Some have commented about the difficulty disassembling the top from the bottom.  A User suggested simply CUTTING OFF the nubs, which also seems to work well.  This works really well!EDIT 7/17/2024: From AJAX:Made the following changes (in version 1.4):Changed the geometry of the filament paths to allow for more tolerance in non-critical areas.Increased tolerances around the display as many have had issues with glass breakage.I wanted the multicolor first layer so I read up on @Sembazuru's single layer MMU-ish instructions.  Tried it out and it worked great, as is seen in the photo.Directions reproduced here:Make sure you have “Expert” mode enabled.In Printer Settings→General→Capabilities increase the Extruders value to the number of different colors you plan on using. 2 in this case.Make sure General→Capabilities→Single Extruder Multi Material box is not checked.In Printer Settings→Custom G-code insert the following into the Tool change G-code panel (you'll need to scroll down on the window to see it):{if layer_z>0 } M117 Change to color {next_extruder} M600; Filament change {endif}In Print Settings→Multiple Extruders make sure Wipe tower→Enable is not checked.Once you have assigned the different colors, if you have more than 2 colors create a chart to know which color number (starting with the default or whichever you number you use for the first color) is which spool of filament you plan to use.