TBS SourceOne V3 7" Prints

thingiverse

Our local MultiGP Chapter has started having a heat of 7" racing. The TBS Source One V3 7" is a great budget frame to get in to this style racing, but I didn't find many race inspired print designs. All designs should be printed in TPU, other than the battery support washers. The Arm Guards should fit 6mm standard and dead-cat style arms. These have slots on the bottom for these tinysleds: https://tinysleds.com/products/6s-x-class-led. The motor protection is designed to fit up to 28xx motors. Print with support. The bottom mount battery support helps to stabilize a big 2200mah 5 or 6s battery and prevents the screws from digging in to the battery. The battery support washers should be printed in something other than TPU because they help to prevent the screws from pulling through the main support. I have included two FPV camera mounts: Foxeer Predator V5 nano with 13mm lens, and Runcam/HDZero Micro V1. I can probably make modifications if I'm given the lens diameter, camera body size (nano or micro), and the distance between the front of the lens and the screw mounts. The current tilt angle is 43 degrees. Full List of current components: Arm Guards Axii mounts (with up/down slot, side/side slot, or no pigtail slot) Under Mount Battery Support (with washers) Turtle Fin FPV Camera Mounts (Foxeer Predator Nano V5, HDZero Micro V1, Runcam Nano HDZero V1) RX Mounts (Tracer front, rear, and side; AxisFlying ELRS front) HD Cam Mounts (Session 4/5 with 45 degree tilt, Hero 9 with 40 degree tilt) Front and Rear Shelf to mount an RX or other accessory Rear Shelf with M2 25x25 mounting to place whoop size boards Enjoy!