TAZ5 Dual Extruder V2 Filament Guide Bracket
thingiverse
Remixed from a tutorial posted by KelVarnson on the Lulzbot forum page, this modified bracket keeps filament straight as it enters the extruder. I was having all sorts of issues with the Taz5 jamming, especially when printing PLA. I started to realize that as the extruder gets to a certain height, the filament becomes bent as the extruder tries to grab it. I modified the bracket given in the tutorial here: https://forum.lulzbot.com/viewtopic.php?f=36&t=3319, essentially making the mounting nut slot a little longer, cutting the profile down so that you can get your fingers underneath still. As well, the filament thru holes and teflon tube holes were a little tight and I needed to clean them up with a drill, which allows it to fit perfectly. Print Settings: Printer Brand: LulzBot Printer: TAZ 5 Rafts: No Supports: No Infill: 30% Notes: You will need an M3x25mm screw and hex nut, a lock nut would be a good idea. See the tutorial here: https://forum.lulzbot.com/viewtopic.php?f=36&t=3319
With this file you will be able to print TAZ5 Dual Extruder V2 Filament Guide Bracket with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on TAZ5 Dual Extruder V2 Filament Guide Bracket.