Tartalexa - Echo Dot Turtle Cover

thingiverse

**Tartalexa** ========== Tartalexa will transform your boring Amazon Echo Dot into a nice sea turtle. Just pop your Echo Dot into the case and let the turtle begin. This model can be printed with or without supports and with a minimum of 5% gyroid infill (basically the minimum infill needed to support top layers). The circular tolerances are quite large (1 mm radius tolerance) to avoid excessive coverage of the Eco Dot speakers. The cable slot is perfectly aligned with the top of the case, which allows for easy movement and rotation. **Printer and setting** Printed on a stock Ender 3 Pro with Ender Series gray PLA. Turned out to be 46g (about 15.5m). *Bed*: 60° *Extruder*: 190° *Infill*: 9% *Walls*: 4 *Speed*: 40mm/s (20mm/s first layer) *Support*: No really required, 50° angle, 5% density If you are ok with this settings you can just download and print my gcode. **Important**: If your printer does support G2/G3 commands, you can use the “Tartalexa-arcwelded.gcode” file. No real advantages other than having a 4Mb gcode file instead of an 11Mb one. **Notes** Feel free to remix my design and to publish your remix, but please include a reference link to me and/or to my design. Commercial use is prohibited except with my express permission. To obtain permission for commercial use, please contact me. https://www.printables.com/model/331067-tartalexa-echo-dot-turtle-cover https://www.printables.com/social/315221-gabrielegasponi