Tarot 250 Front 20mm Spacer for LED upgrade

thingiverse

I just tweaked the original STL from Vilse for a LED bumper upgrade with nylon spacers. Nylon spacers are about 22 millimeters thick, minus two millimeters for a plate that is twenty millimeters thick for added space on top and bottom of the PDB plate. This print can be upgraded with 20 millimeter nylon spacers. The round spaces do not need supports, so it's best to use 60% infill preferences. Print Settings Rafts: It doesn't matter. Supports: It doesn't matter. Infill: 60% Notes: Front LED Pumper and Back LED Pumper I used 60% infill when printing with Pla. I also tried 30% for the back. The layer height is 0.2 millimeters. Top three solid layers and bottom three solid layers make this print sturdy. Perimeters are two on the main part and three on the round spacer portion of this model. I used a similar set of settings when printing with Pla. However, I chose different infill percentages for a back bump for my upgrade, so now there is 60% infill, which I got with .2mm layer height. Solid top layers are two, while bottom layers are two on the spacer model too. Perimeters are three instead of just two this time, and this round part works nicely like that too.