Taranis Qx7 AG01 Gimbal Mod

thingiverse

Taranis Qx7 Fans, here are the files for the Radiomaster AG01 Full Metall Gimbals Mod. Steps: 1: All at your own Risk!! Very Important, the Connecter of the AG01 Gimbal Fit the Qx7, but you have to repin the Cabels like the Picture, or you demage your Mainboard in the Qx7, don't ask why i know that. 2.The Gimbal Rings need to move Z high -3.55mm in the Slicer to print how it should be. So they print with reduced bottom of 3.55mm. Print in TPU 3. After Removing Stock Gimbals, the Original Plastik stands for the screws need to be Cut of, so that the Gimbal sit complete flat in the Ring. 4. Drill Holes 2mm in the Original Holes to the Front Cover. Also the Mounting Adapter Angle need to be drilled 2mm, i desinged it smaller to get a better fit of exactly 2mm. 5. The Adapter Angle need to be Cut on the Underside to the exact lenght you need, messure that first in your Taranis with the Gimbals inside. I desinged the Angle in the Longerst version, so you can easy Cut it how you need them. I would print a few more angles so you can test what lenght fit best. Use PETG or PLA 6. For the Screws i use M2 20mm or 16mm should fit too with Nuts. 7. The Backcover of the Qx7 need to be Cut at the Module bay arround the Hallsensor a good bit. But it's no problem, a external Modul still Fit, see pictures. 8. When all the Work is done, do a Stick Calibration in the Taranis OpenTx Menü for the new Gimbals. This Mod is not desinged to win a price, more to fit the Gimbals secure and strong as easy it gets. When it's done right the Gimbal sit absolutly strong and secure. For the end game secure, you can fill the inside part on the angle where the screw is with Hotglue so they never move at all. If you have any questions feel Free to ask.