Tamper Tag

prusaprinters

<p>This is a tamper tag, kinda like what you would find on a utility meter or box. It is meant to indicate if whatever is being locked up was tampered with, since it requires cutting to remove. It is not <i>technically</i> a security device.</p><p>It was designed around some stainless steel, 0.041", lock wire I had laying around. The wire was likely from Harbor Freight.</p><ul><li><strong>Wire dimensions:</strong> Total length = 170mm or 6.75in, 90* bend = 12mm or 1/2in, hook = 9mm or 3/8in</li><li><strong>Directions</strong><ol><li>Cut the wire to length</li><li>Bend the wire 90* and hook to the lengths listed above.</li><li>Glue the two halves of the tag together with the 90* end sandwiched between them as pictured.</li><li>Wrap the wire around whatever you want to tamper lock.</li><li>Jam the hooked end into the open slot and tug firmly to lock.</li></ol></li></ul><p>**FreeCAD files are attached, if you'd like to remix it!</p>