Tamiya King Yellow Electronics Platform Mount Holder

thingiverse

Despite its size, I found the available space for mounting the speed controller, receiver and other electronics to be unsatisfactory. Especially with the King Yellow's huge volume under its body in mind, I decided to utilize some of it by adding a platform to mount my electronics on. Features: * A large area to place components * Many slots for cable ties * An antenna mount with some holes * A mount position for an ESC power switch (19 mm hole distance, 2 mm diameter) The platform utilizes all provided printable parts (remember to print two feet!) and the screw holes already existing on the model. You will need some additional M3 screws (counter-sunk and regular head) for the platform itself and the feet holding it in place. You may need to drill out some of the holes with a 3 mm drill bit to allow the screws to move freely. Material needed: * 4x M3 screws, 10 mm, counter-sunk head for mounting the platform to the girders * 2x M3 screws, 10 mm, regular head for mounting feet to frame * 2x M3 screws, 12 mm, regular head for mounting feet to front girder * 6x M3 nuts * (A couple of M2 screws for the switch [usually already supplied]) Please note that the picture shows a slightly older version.