Talon - Version 3

prusaprinters

<p>Mostly just having some fun with this print (although I do have some ideas for using this down the road). There are only two pieces to this: the talon and the stand (the ball is not included, but there are plenty of other options for that available at the usual places). The claw has a plug at the bottom end for mounting in a socket in the stand.</p> <p>See Version 1 for a print file for the stand.</p> <p>Here are some dimensions you may find useful:</p> <p>The claw is made for a ball with a diameter of 2.5 in. (63.5 mm). The plug has a diameter of 0.45 in. (11.43 mm) and a length of 0.45 in. (11.43 mm); the plug also has a 1 degree taper to make it easier to fit it into the socket hole.</p> <p>I plan to make this model in several different variations; this is version 3.</p> <p>Version 3 : Talons are straight segments with "knuckles". The claws extend only to the center of the ball, making it very easy to insert or remove the ball.</p> <p>The original model was created in OnShape 3D CAD - the relevant CAD file is available here:</p> <p><a href="https://cad.onshape.com/documents/0716787efa057a8839b09f7f/w/1e343278069a753c83a7de07/e/98bedb8e584a90d0fac62631">https://cad.onshape.com/documents/0716787efa057a8839b09f7f/w/1e343278069a753c83a7de07/e/98bedb8e584a90d0fac62631</a></p> <h3>Print instructions</h3><p>Print with a brim and supports; I have had success with "Support on build plate only" - if the "Everywhere" option is chosen the claws may be difficult to remove from the supports without breaking.</p>