Talon Claw U Super Core HPA Nerf

cults3d

This is based on the Talon Claw U by Slug, allowing users to integrate a Super Core made by Spectre's Workshop into their build. Print at .2mm, with no supports needed for this project. The files provided include all components except the mag side plates and handle grip, which require modifications and need to be printed from scratch. This design is specifically tailored for Talon mags only. Additional parts required include: 1. A 1/8TH BSA to 1/8TH NPT fitting, available on Amazon at https://www.amazon.com/gp/product/B01M8NVD5S/ref=crt_ewc_title_dp_2?ie=UTF8&psc=1&smid=A3OXQWQJ6RTQRT. 2. Two 1/8th to 1/8th 90 degree male to female fittings, available on Amazon at https://www.amazon.com/gp/product/B074DTL1N4/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1. 3. A Clippard MJV0-3 valve, available on Amazon at https://www.amazon.com/gp/product/B00VMT77KO/ref=ppx_yo_dt_b_asin_title_o08_s03?ie=UTF8&psc=1. A threaded monkey mods barrel, similar to this one https://www.monkeemods.com/barrels/monkee-mods-aluminium-inner-barrel-for-jet-alpha-kit-35cm, is also required for the build. To complete the valve system, use McMaster 89965K471, a 5-16th aluminum tubing cut to 6 7/8 - 6 15/16. This rod will be used to push the valve in place. A printed cap can be used at the end with a 4/40 screw, and a screw through the trigger to the rod is also recommended. Please refer to photos for further clarification on assembly.