Talon Claw U Super core HPA electric solenoid

thingiverse

This is a solenoid-controlled super core build. An Empire regulator handle and a Wolverine storm on tank HPA regulator handle are included. This setup is designed to work with Liam's super core, featuring an adjustable barrel holder in the front mag that accommodates both V3 and V3.2 cores. The body of this assembly is based on Captain Slugs' U-channels. To create it, simply use the prints as drill jigs with a 1/8th drill. Drill one side at a time from the back, going all the way through the entire print – a very straightforward process. A suitable solenoid for this setup can be found on eBay at https://www.ebay.com/itm/AIRTAC-SOLENOID-VALVE-3-WAY-12V-110V-BSP-NPT/283573630339?ssPageName=STRK%3AMEBIDX%3AIT&var=584811748281&_trksid=p2057872.m2749.l2649. Edit: Although all the fittings are BSPT, this NPT solenoid works perfectly with the file set available at https://www.ebay.com/itm/Pneumatic-3-Way-Electric-Solenoid-Air-Control-Cylinder-Valve-12V-DC-1-8-Inch/121648669252?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649. For the fitting connecting the core to the solenoid, consider purchasing https://www.amazon.com/gp/product/B004KNHGY6/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1. Another necessary item is this fitting: https://www.amazon.com/gp/product/B009PTHIFW/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1. Either a 6mm 1/8th BSP or NPT will work, depending on the regulator you are using. A suitable battery for this setup is available at https://www.amazon.com/gp/product/B0714GN73V/ref=ppx_yo_dt_b_asin_title_o04_s02?ie=UTF8&psc=1. For safety purposes, consider purchasing a switch at https://www.amazon.com/gp/product/B07FLWWX9G/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1. 10/24 x 1inch binding post nuts can be found at ACE for $2 – it's recommended to purchase them from there. A 5a micro switch is necessary for the trigger.